Popular in many applications including. The unique Built in Siren has 32 available Tones together with Volume Control (zero to 106 Decibel) allowing you to utilize the Control Box for your individual requirements. It is powered by a plug in transformer, which can be connected into a fused spur (recommended), we also offer the option of including a Backup Power Supply for applications wanting to ensure the system works throughout a Power Cut.
The Heavy Duty Push Button (with'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request). The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall). The Wireless Siren Assembly is powered by a plug in Transformer and is fully weatherproof therefore can be fitted in indoor and outdoor locations, additional Wireless Sirens can be added to any system. When the Push Button is pressed, the Receiver will activate the Siren & Flashing Strobe Light, the standard duration options for the Siren activations are from 10 - 60 seconds or 5 minutes, for Panic Alarm applications we can supply a Latching Siren Assembly.
These Siren Systems are very Easy to Install, the basic process would be. Mount the H/D Push Button. Mount the Battery Transmitter & Box (4 x Screws).
You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the installation). Choose & Adjust the Siren Volume & Sound settings (simple settings on the back of the siren). Mount the Siren Assembly (4-screws). Connect the Plug in Transformer into a standard 3-pin wall socket. Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include.Additional Push Buttons & Transmitters. Simple Handheld or Wall Mounted Internal Push Buttons. These Wireless Bell System could also be used for other uses including. Very Easy & Quick to Install! 1 x H/D Push Button. 1 x S Transmitter & Mounting Box. 1 x 3 metre Bell Cable. 1 x'S' Type Wireless Receiver. 1 x Flashing Blue LED. Size: 225 x 190 x 67 mm (not including Strobe). Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes. Wireless Operating Range: 900 metres - line of sight (depending on the chosen transmitter).
Repeater Option: Yes (available as an optional option). Siren: Adjustable in Tone (32 options) & Volume Control.Duration of Siren & Flashing Strobe LED: 10, 60 seconds or 5 minutes (can be reset by disconnecting the power supply). Power Supply: Plug in 3-pin Transformer (can be used with spur socket), 2-pin available upon request. Backup Battery: No (available as an optional option). Wireless Range: 900 metres (line of sight). Power Supply: 1 x MN21 12v Battery.
Size: 90 x 40 x 15mm. Colour: White, Grey & Red Button. External Size: 195 (L) x 90 (W) x 45 (D) mm. Internal Size: 133 (L) x 83 (W) x 35 (D) mm.
Size: 85mm (L) x 40mm (W) x 40mm (D). Contact Type: NO or NC.
Ultra Secure Direct are a UK based company specializing in Security & Safety products.